Mortar Calculator

Estimate the mortar bags for a concrete block or brick wall using its net area or the number of units. The calculator shows the allowance, whole bags to budget, bag weight, and optional material cost. Start with the coverage printed on the product you plan to buy.

Mortar Calculator for Block and Brick Walls

Choose a unit-count estimate or calculate from wall area. Results are planning estimates; use the coverage for your mortar product and job details.




Wall-area presets assume a standard face and ⅜-in. joints. Edit the units-per-square-foot value for a different size or layout.



Default is a published 80-lb product-yield example: up to 13 standard CMUs or 37 standard bricks per bag. For another brand or bag size, enter its stated yield. CMHA’s 16-CMU estimate assumes face-shell bedding and already includes a nominal waste allowance.



The 10% starting value is an editable planning allowance, not a universal recommendation. Avoid adding it again when using a yield that already includes the allowance.

Enter your measurements, then calculate.

How Many Bags of Mortar Do You Need?

The answer depends on how many blocks or bricks you are laying, how much a bag covers, and whether that coverage figure includes jobsite waste. For a quick standard-CMU estimate, 100 blocks need about 9 80-lb bags when using a 13-block product yield and adding a 10% allowance. A 100-square-foot wall of standard 8 × 8 × 16 in. CMU has about 112.5 block faces before waste, so budget about 10 bags on the same basis.

Those are not universal yields. The manufacturer’s package coverage and the applicable project specifications take priority. The industry estimate and a specific product label use different assumptions, so the table keeps them separate.

Estimate basis for 80-lb premixed mortar 100 standard CMU blocks 100 sq. ft. standard CMU wall Assumption
CMHA estimating table About 7 bags About 8 bags About 16 conventional CMUs per bag; face-shell bedding; table includes nominal waste
Product-yield example, no extra allowance About 8 bags About 9 bags Up to 13 standard CMUs per bag; use only if that matches the product you buy
Product-yield example plus 10% allowance About 9 bags About 10 bags 13 CMUs per bag, then add the selected 10% allowance and round up

The calculator starts with the product-yield example, but you can edit the yield and allowance. Do not average the industry and manufacturer figures. Select one basis, confirm it against the bag or estimating method, and state that basis when sharing the result.

Mortar Calculator Formula

For a known unit count, use:

Bag equivalents = units to lay ÷ units per bag × (1 + allowance percentage ÷ 100)

Whole bags to budget = bag equivalents rounded up to the next whole bag

For a wall-area estimate, first convert the net wall area to masonry units, then use the same bag formula. For standard 8 × 8 × 16 in. CMU, one square foot of wall face takes about 1.125 units. Subtract door and window openings before entering the wall area. The brick presets use common modular and standard brick counts with a ⅜-in. joint; use a custom rate if your brick dimensions, bond, or joint differ.

Worked Example: 100 CMU Blocks

  1. Use the stated product yield: 13 standard blocks per 80-lb bag.
  2. Divide 100 blocks by 13: 7.69 bag equivalents before an added allowance.
  3. With a selected 10% allowance: 7.69 × 1.10 = 8.46 bag equivalents.
  4. Round up: plan for 9 whole bags.

If your product label shows a different coverage, replace 13 with that yield. If your estimate uses the CMHA face-shell figure, that table already includes nominal waste, so do not automatically apply the same allowance twice.

Why CMHA and Manufacturer Bag Counts Differ

Industry tables and manufacturer coverage statements are useful for different estimating situations. The Concrete Masonry & Hardscapes Association’s material-estimating table lists approximately 16 conventional CMUs per 80-lb preblended-mortar bag. It assumes face-shell bedding and says its values include nominal amounts for waste. A manufacturer product sheet may list up to 13 standard 8 × 8 × 16 in. blocks for its own 80-lb mix. That is product-specific coverage.

Mortar use also changes with bedding method, unit dimensions, joint thickness, openings, returns and corners, handling, and mason technique. Full-bed applications can use more mortar than face-shell bedding. Use the label for the exact bag you are buying when it provides a coverage figure; treat general estimating tables as planning references.

What Changes Mortar Use?

  • Net wall area: Subtract doors, windows, and other openings rather than counting the gross rectangle.
  • Unit size and type: A square-foot estimate needs the correct block or brick face rate. A direct unit count avoids this conversion.
  • Bag coverage: Check the specific brand, product, and bag size. Do not assume a 60-lb bag covers the same number of units as an 80-lb bag.
  • Bedding and joint details: Face-shell bedding, full bedding, thicker joints, returns, and special shapes affect actual use.
  • Waste allowance: Use an allowance suited to the layout and work conditions. Keep it separate from any yield figure that already includes waste.
  • Site-mixed mortar: A site-mixed batch is not the same as a preblended bag; use the specified mix proportions and a relevant estimating table.

Mortar vs. Grout for CMU Walls

Mortar bonds blocks at their horizontal bed joints and vertical head joints. Grout is placed inside selected block cores or wall cavities, often around reinforcement. These are different materials and require separate quantities. This calculator estimates mortar only; use the CMU grout calculator for core fill and reinforcement-related grout estimates.

Choosing Mortar Type

This tool estimates quantity; it does not select Type N, S, M, or O mortar for a project. Follow the construction documents, applicable code, and product instructions. If the required mortar type is unclear for a structural, below-grade, retaining, or other safety-related wall, ask the project’s designer or a qualified local professional before ordering.

Common Questions

How many 80-lb bags of mortar do I need for 100 blocks?

Using an example yield of 13 standard blocks per bag, 100 blocks take 7.69 bag equivalents before extra allowance. With 10% added, the estimate is 8.46, so budget 9 whole bags. The CMHA estimating figure is about 16 conventional blocks per 80-lb bag with face-shell bedding and nominal waste included; on that basis, 100 blocks round to about 7 bags. Check the product coverage and avoid counting waste twice.

How many blocks does one 80-lb bag of mortar lay?

It varies by product and method. One manufacturer’s published product example states up to 13 standard 8 × 8 × 16 in. blocks per 80-lb bag. The CMHA estimating table gives about 16 conventional CMUs per bag for face-shell bedding and includes nominal waste. Use the figure that matches your product or estimating basis.

How many bags do I need for a 100-square-foot CMU wall?

A 100-square-foot wall uses about 112.5 standard CMU faces before waste. At 13 blocks per 80-lb bag, that is 8.65 bag equivalents, or 10 whole bags with a selected 10% allowance. Your product label, openings, bedding method, and actual layout can change the order quantity.

Does the calculator include grout for block cores?

No. Mortar bonds the units; grout fills cores or cavities. Estimate grout separately with the CMU grout calculator.

Can I use the same coverage for a 60-lb bag?

No. Enter the yield printed for your actual bag. Bag weight alone is not enough to determine how many units a product will lay.

Does the estimate cover stone, repointing, or site-mixed mortar?

No. Stone veneer, repointing, parging, dry-stack walls, site batching, and unusual joint geometry use different methods and product yields. Use the applicable product coverage or a project-specific takeoff.

Related Calculators and Guides