Masonry core-fill quantity planner
Estimate grout from the cells you will actually fill
Use your block manufacturer’s fill-volume data and the grout layout shown on your plans. Calculate cubic feet, cubic yards, cubic meters, and optional grout bags without assuming that a nominal block size has one universal core volume.
1. Choose your takeoff method
Changing systems converts the entered dimensions, fill factors, shared volume, and bag yield.
Use a published wall-area factor that matches the exact block product and grouting pattern. It may already include an allowance. Components included in that factor are not added again here.
Count actual continuous vertical cell runs on the plans. One bar does not always mean one separate cell. Calculate groups of different heights or core sizes separately.
Count the actual blocks whose cells are fully filled. Use grout volume per entire filled block, not per single cell. Special units may need a separate takeoff.
2. Optional grout bags & price
Bag counts round up to whole bags. Bulk material cost uses the unrounded volume. Delivery, pumping, tax, and labor can be separate.
Example data was loaded. The 0.30 ft³/block and 0.66 ft³/bag values are illustrative. Replace them with your product data before ordering.
Enable JavaScript to use the calculator.
3. Your grout estimate
—
Cubic yards of grout
Enter your product fill data, or try the worked example.
A nominal block size alone does not establish its fill volume.
Quantity estimate only. The project drawings specify where grout is required and the appropriate grout and placement details. Confirm final quantities with the block and grout suppliers.
Which CMU grout method should you use?
| Information available | Choose | Check before calculating |
|---|---|---|
| Published grout per wall area | Wall area + matched factor | Exact unit and grout pattern; included allowance |
| Actual vertical cell runs on plans | Selected cells + bond beams | Run height, fill per linear length, shared volume |
| Count of fully filled individual blocks | Counted fully filled blocks | Volume per entire filled block |
For the wall-area method, do not substitute a fully grouted factor for a partially grouted layout. If the source factor includes bond beams or an allowance, retain that scope when using it. A separate geometry-based takeoff may be more suitable for irregular walls, openings, partial-height grout, and special units.
What data should you get from the supplier?
- The actual CMU product/configuration and grout fill volume in a clearly defined unit: per filled block, per linear cell run, or per specified wall area and grout pattern.
- Separate bond-beam unit data if using the selected-cell method with horizontal beams.
- Whether the factors already include waste, displacement, openings, bond beams, or another allowance.
- The mixed yield per bag for your actual masonry grout product, including the bag size to which that yield applies.
- The supplier price basis, order increments, minimum load, delivery, and any pumping charges.
The outside dimensions of an 8 × 8 × 16 nominal block do not reveal the grout volume in its cores. Face shells, webs, tapered cells, end geometry, and special shapes vary. Do not estimate fill by treating the block as a solid outside rectangle.
CMU grout calculation formulas
Wall-area method: grout (ft³) = net wall area (ft²) ÷ 100 × matched grout factor (ft³ per 100 ft²)
Vertical cells: grout (ft³) = actual cell-run count × run height (ft) × grout per linear foot of one cell run
Bond beams: grout (ft³) = total beam length (ft) × grout per linear foot
Combined cells and beams: vertical volume + beam volume − shared volume
Counted blocks: grout (ft³) = filled block count × grout per entire filled block
Whole bags: round up [volume including additional allowance ÷ mixed yield per bag]
Divide cubic feet by 27 for cubic yards. Multiply cubic feet by 0.028316846592 for cubic meters. In metric mode, the tool accepts liters per m², liters per linear meter, or liters per block/bag as labeled, and converts them before calculating.
Worked example: counted fully filled blocks
This example demonstrates the arithmetic using illustrative values. It is not a specification for a particular block or grout product.
| Input or step | Example |
|---|---|
| Fully filled blocks | 100 |
| Illustrative grout per block | 0.30 ft³ |
| Base grout volume | 100 × 0.30 = 30 ft³ |
| Additional allowance | 10% = 3 ft³ |
| Total estimate | 33 ft³ = 1.222 yd³ = 0.935 m³ |
| Illustrative mixed bag yield | 0.66 ft³ |
| Whole bags | 33 ÷ 0.66 = 50 bags |
Selected cells and bond beams: avoid shared-volume double counting
A vertical grouted cell can intersect a horizontal bond beam. Adding both full component volumes can count that shared space twice. Enter a shared-volume deduction from your takeoff, or use factors/lengths whose scopes already exclude overlap. The tool does not infer intersections from beam length alone.
For an arithmetic example, suppose 10 selected cell runs are 8 ft high and use an illustrative 0.10 ft³ per linear foot. Vertical grout is 8 ft³. A 40 ft beam at an illustrative 0.12 ft³ per linear foot adds 4.8 ft³. If the verified shared volume is 0.8 ft³, the combined base is 8 + 4.8 − 0.8 = 12 ft³. With 10% extra, the estimate is 13.2 ft³. These factors are examples; use the actual product data.
For a fully grouted wall, a matched wall-area factor already represents the grout included in its stated wall configuration. Adding a complete bond-beam volume again is not automatically appropriate. Special-unit differences need a consistent, non-overlapping takeoff.
Common grout estimating mistakes
- Using a fixed percentage for corners: actual corner-cell quantity depends on the layout, cell count, height, and unit configuration. It is not always 25% of wall grout.
- Mixing cells and blocks: grout per cell is different from grout per entire multi-cell block. Match the count to the coefficient.
- Adding allowance twice: check whether a handbook, manufacturer coefficient, or quoted grout quantity already includes it.
- Using concrete-bag yield for masonry grout: enter the yield of the actual specified grout product.
- Treating bag volume as dry powder volume: the relevant yield is mixed usable grout per bag. Follow the product’s mixing instructions; this tool does not set water content.
CMU grout calculator questions
How much grout fills an 8 × 8 × 16 block?
There is no single fill value that fits every nominally 8-inch unit. Use fill data for the actual manufacturer, block geometry, and cells being grouted. The calculator deliberately asks for that factor instead of assigning a universal volume from outside dimensions.
How do I estimate grout for corner cells only?
Count the actual continuous cell runs required at corners on the plans, then use their actual height and the single-run fill coefficient. Include additional cells at openings, ends, and other reinforced locations only where the design requires them.
How many grout bags do I need?
Divide the calculated grout volume, including your additional allowance, by the mixed yield per bag printed on the product data. The calculator rounds up to whole bags. If you omit yield, it still calculates volume but does not invent a bag count.
Why does additional allowance start at 0%?
Published estimating factors can already include an allowance. Starting at zero avoids silently adding another percentage. Check the source basis, then enter only the additional allowance you intend to apply.
Can I use the tool for a bond beam only?
Yes. Select Selected vertical cells + bond beams, enter 0 vertical runs, enable bond beams, then enter total beam length and the matching beam fill factor. No vertical overlap is deducted when there are no vertical runs in that estimate.
Does this tool decide whether the wall should be fully grouted?
No. Grouting locations, material requirements, reinforcement, placement, consolidation, and inspection details come from the project design and applicable requirements. The tool estimates quantity for the selected scope.
Is CMU grout the same as mortar or tile grout?
These products have different purposes and specifications. This calculator concerns masonry cell and bond-beam fill. It does not estimate mortar joints or tile joints. Use the specified masonry grout product and its published yield.
Related masonry planning guides
Read the CMU grouting methods guide, bond beam block guide, and CMU wall reinforcement guide to understand the components shown on your plans. For separate material takeoffs, use the CMU Block Calculator and Mortar Calculator.