Brick Calculator

Estimate the number of bricks required for walls, patios, masonry work, and construction projects with our easy-to-use brick calculator.

Brick Calculator

Estimate the bricks needed for your wall. Enter wall dimensions, subtract openings, choose a brick size, and add an allowance for cuts and breakage.

For walls with different dimensions or openings, calculate each wall separately.
Rates are planning estimates before waste. Confirm the brick dimensions and coverage with your supplier.
Use the plans or a detailed takeoff when the wall has a special bonding pattern.
Choose an allowance that fits the project, handling conditions, and your supplier’s advice.
Enter your wall details, then select Calculate Bricks.

ow Many Bricks Do You Need?

Brick count depends on net wall area, brick face size, bond pattern, number of wythes, and allowance for cuts or breakage. For a single-wythe wall with modular brick and a ⅜-in. joint, the Brick Industry Association's planning table uses 6.75 bricks per square foot before waste.

Example: a 20-ft × 8-ft wall has 160 sq. ft. of gross area. At 6.75 modular bricks per square foot, it needs 1,080 bricks before waste. Add a selected 5% allowance: 1,080 × 1.05 = 1,134 bricks. The calculator rounds the order to a whole brick.

Bricks per Square Foot by Common U.S. Size

These planning values use the Brick Industry Association's wall-area table for running or stack bond with a ⅜-in. joint. The rates are before waste; the calculator adds waste in a separate field.

Brick designationApprox. bricks per sq. ft.Approx. bricks per 100 sq. ft.
Modular6.75675
Engineer modular5.63563
Queen5.50550
Standard6.55655
Engineer standard5.39539
King4.55455
Norman4.50450
Utility3.00300

Brick names and dimensions may vary by manufacturer. If your chosen brick is not a close match for a listed size, use the supplier's pieces-per-square-foot figure or enter a custom rate.

Brick Calculator Formula

  1. Gross area per wall: wall length × wall height.
  2. Net area per wall: gross area minus the measured area of doors and windows.
  3. Base brick count: net area × brick-size rate × number of wythes × number of identical walls.
  4. Order quantity: base count × (1 + waste percentage ÷ 100), rounded up to a whole brick.

This wall-area method estimates the main face-brick quantity. Special bond patterns, corners, returns, pilasters, lintels, and partial units may change the takeoff. Include those details separately when they are part of the project.

How to Measure Wall Openings

Measure each door or window opening as width × height, then add the opening areas for one wall. Enter that combined area in the calculator. For several identical walls, enter the openings for one wall and the number of walls; the calculator subtracts the same opening area from each one. If the walls have different openings or dimensions, calculate them separately and add the brick totals.

Single-Wythe and Double-Wythe Walls

A wythe is a continuous vertical layer of masonry units. The rate table is a face-area estimate for one brick wythe. A double-wythe wall uses two layers across its thickness, so the calculator doubles the face-brick estimate. Structural bonding patterns and headers can alter the number of bricks; use the plans or a detailed takeoff when those patterns matter.

Waste Allowance and Brick Size

Waste is separate from the base size rate. The BIA says allowances vary, and gives at least 5% as a general rule for delivered brick quantities; job conditions or project experience may justify more. Set the calculator to match the project rather than treating one percentage as right for every wall.

Use the brick designation as a starting point, not a substitute for checking actual dimensions. Manufacturer naming can vary, and non-modular bricks do not all fit the same layout. Modular sizes are designed to work with their intended joint module; a different brick, joint, or bond pattern can change the count.

What This Brick Calculator Does Not Include

  • Mortar, sand, grout, reinforcement, ties, flashing, lintels, labor, or delivery.
  • Special bond-pattern correction factors, returns, corners, arches, soldier courses, or decorative features.
  • Cut plans, damage specific to a project, or stock requirements from your supplier.

For mortar bags, use the Mortar Calculator and enter the coverage for the product you plan to buy. For concrete block quantities, use the CMU Block Calculator. If the project uses concrete masonry rather than fired-clay brick, the Standard CMU Dimensions guide explains block sizes.

Frequently Asked Questions

How many modular bricks are in a square foot?

A modular brick wall takes about 6.75 bricks per square foot using the BIA table's ⅜-in. joint basis, before waste. Other brick sizes use different rates.

How many bricks do I need for a 20 × 8 ft wall?

The gross area is 160 sq. ft. A single-wythe modular brick wall at 6.75 bricks per square foot needs 1,080 bricks before waste. With a 5% allowance, order about 1,134 bricks, before any special bond or detail adjustment.

Does the calculator subtract doors and windows?

Yes. Enter the total opening area for one wall; it is subtracted from that wall's gross area before the selected brick rate and waste are applied.

Does it calculate mortar bags?

No. It estimates bricks only. Mortar coverage depends on the brick, joint, product, and laying method. Use the Mortar Calculator for a separate estimate.

Can I use this for concrete brick or CMU?

The listed size rates are BIA planning values for clay brick designations. For concrete masonry units, use a CMU-specific rate and the CMU Block Calculator.

Related Calculators and Guides